battery changed and problems appeared

[AdESTORn]

What’s up, guys?


My Invicta watch stopped functioning right after I changed the battery. Actually, I didn’t visit any repair shop, I did it myself. Have read a couple of google instructions. I’ve followed them step by step and didn’t have any issues during the process. Also, I have done this before with my other watches and didn’t have any problems. This time something went wrong.


What does work smoothly is the Chrono. But the time hands simply don’t run. The instructions I had read suggested that occasionally it needs to be like “shorted out”. Did that as well but nothing changed. Any ideas anyone? Thanks in advance guys. Sam

 

[BrIerNAN]

So bad…So bad… I’m not the best councelor sadly. One of my Casio watches came up with the same problem a couple of years ago. I changed the battery myself the first time, but it didn’t work. Then, I took it to the repair expert thinking that I had done something wrong. He made the same procedure and also cleaned it professionally, thinking that maybe some dust began to affect the inner mechanism. It didn’t work either. I had to quit it since I never knew what went wrong. Sorry, ‘m so sorry for your piece. You should try to leave it at the repair shop. It’s not excluded that there is something g experts could still do for it

 

[SwInEIGh]

I don’t always rely on google instruction articles. In many instances, these can be written by copywriters and not watch experts. So, not always their recommendations are the right ones. Have you watched any YouTube videos suggesting how to replace batteries for invite watches? These might be pretty helpful as they are created by professionals, or at least, “almost” professionals.

Also, I should ask… have you checked the battery voltage of the one you removed and the new one you replaced? Maybe the problem is not in the battery at all. If these indicate something around 1,5v-the batteries are ok then. And the problem might be hidden in the inner mechanism actually

 

[AdESTORn]

I don’t always rely on google instruction articles. In many instances, these can be written by copywriters and not watch experts. So, not always their recommendations are the right ones. Have you watched any YouTube videos suggesting how to replace batteries for invite watches? These might be pretty helpful as they are created by professionals, or at least, “almost” professionals.

Also, I should ask… have you checked the battery voltage of the one you removed and the new one you replaced? Maybe the problem is not in the battery at all. If these indicate something around 1,5v-the batteries are ok then. And the problem might be hidden in the inner mechanism actually

Oh, believe me, I did. The problem is that all the videos posted on YouTube don’t refer to specifically my model. I mean these referred to Invicta watches as a whole, but not my exact model. The truth is that the previous battery served way too long, maybe about 10 years or smth like that. I was both shocked and amazed to see that it wasn’t running out. About the voltage, no, I didn’t check it.

As for the service boutique, I did visit one. But the expert has told me that he didn’t have anything to deal with Invicta timepieces since the boutique didn’t have the authorization to repair them.

As for the “short it out” it wasn’t my idea. It was another repair expert who suggested it. At that moment I didn’t since I didn’t have the watch with me, as I was just passing nearby and decided to talk to the expert on the way home. Possibly, I did something wrong while ”shortening it out” on my own at home. Either way, I think I’m gonna look for an authorized dealer though. That’s the only solution I see

 

[Nobbing]

Hi there

Is it possible to attach a pic since you had your watch open? Usually, somewhere in the inner part of watches should be placed some tiny info about the WHO manufactured the movement. From this starting point, it could be easier for you to find some informational guides for this specific type of movement

 

[ObeisDexter]

U sure you need an authorized dealer? It’s not the case I think. I’m prone to believe that you simply went to the wrong “expert” who didn’t know what exactly to tell you other than just “the boutique is not authorized”. A qualified specialist would help you at least with advice or a watch close inspection. The second one doesn’t really sound like have known what he was talking about. “Short it out” is not the primary solution for such cases. Indeed, this procedure is recommended for certain quartz accessories. The only BUT is that in most cases such watches come with a specific marking suggesting that they are “qualified” for this technique. Not all quartz watches need to be restarted by shorting them out after the battery is changed. So, the minimum the “” expert” could do is to check for the markings

 

[AdESTORn]

Hi there

Is it possible to attach a pic since you had your watch open? Usually, somewhere in the inner part of watches should be placed some tiny info about the WHO manufactured the movement. From this starting point, it could be easier for you to find some informational guides for this specific type of movement

sure, sec

 

[Nobbing]

I might be wrong but here is what I’ve concluded during my quick research. Considering the dial layout of your watch and the additional sub-dials, I suppose that your timepiece houses a Miyota caliber 0S60 movement. Try to find some instructions about this type of movement and associated problems that might occur with it. Really hope it’s not a movement issue though. But, I think finding instructions for the movement is the first you have to do to exclude the possibility of a movement problem

If it still is, the news is not encouraging at all. Some repair shops might require almost the same price for the repair as the overall price of the watch.
Some similar Invicta’s are about $100 or smth like that. The repair might price you at around $60, especially if it is an authorized dealer you want. So, here is when you have to decide how much you luv your watch and are ready to pay that money only just to keep having it. Or alternatively, it would be high time to look for a newer timepiece. But again, this is the worst-case scenario. Really hope its just a battery issue

 

[DanielDJZI]

ask some expert to check if the movement is ok, at least

 

[LIgHtere]

doesn't sound like a battery issue... for your sake, take a new battery and try to replace it again... sounds stupid but it might work. ive once bought a new counterfeit battery that didn't work on none of my watches... I didn't know it was a counterfeit... I thought my Casio went out of service, but it was actually the battery... so I bought another one from a service shop and it all worked out. in your case, I'd try a new battery to exclude this possibility. If it doesn't work, find a good repair shop. and it's not necessary to be an authorized dealer

 

[CasPer$$hunteR]

The description of the issue is too short to offer u some quick and correct insights. Some questions appear in my mind and maybe these will help u figure it all out. Is it the first time u replace the battery of this watch?
Are u sure that the new battery was placed in the right place? Did u check the battery voltage before you inserted it? It’s not excluded, it was already faulty. As a general rule, the voltage = 1.5v before insertion.
Did u clean all contacts in the inner part of the watch with a cotton bud before battery insertion?
R u sure u matched the battery polarity accordingly?
The most frequent issues related to battery replacement include:
-poor battery quality;
-dirty contacts within the watch components;
-old stock battery.
If neither of these recommendations work, then it’s definitely a movement issue

 

[sEVENDEM]

The description of the issue is too short to offer u some quick and correct insights. Some questions appear in my mind and maybe these will help u figure it all out. Is it the first time u replace the battery of this watch?
Are u sure that the new battery was placed in the right place? Did u check the battery voltage before you inserted it? It’s not excluded, it was already faulty. As a general rule, the voltage = 1.5v before insertion.
Did u clean all contacts in the inner part of the watch with a cotton bud before battery insertion?
R u sure u matched the battery polarity accordingly?
The most frequent issues related to battery replacement include:
-poor battery quality;
-dirty contacts within the watch components;
-old stock battery.
If neither of these recommendations work, then it’s definitely a movement issue

share same thoughts and would recommend same steps to take

 

[igivente]

After changing the battery, also check if the winder is pushed fully into its initial place. Also, might sound crazy, but u can try leaving the watch in a warm place, something like an airing cupboard. A cold environment can encourage the watch to work again by “loosening” the inner mechanism

 

[whySOniCE456]

sure of performing the "short out" correctly?